The opportunity to solve the access from the Pocket PC device to the problem

            


These days fiddle Pocket PC, encountered some trouble, to sum up their own mind, it is also hope that the brothers later encountered the same problems do not spend too much time
Question: Pocket PC via the USB connection on my computer, can be accessed through the My Computer ineternet, but can not access the site on my computer

* Check the ActiveSync menu "File - & gt; connection settings" window on the computer in the "this computer is connected to the" is how settings.
Select the "internet", then the device can only be accessed Sina, Netease who, if you select "Units Network", the device can only access your computer and other computers on the LAN.
"This computer is connected to the" select "Auto" (default), I am here again and select the "internet" the same effect, and can not automatically access the internet and LAN simultaneously, perhaps my character issues.

* Address to write to "http: // computer name" IP address can not be written.

* If you are in the debugger in VS2005, using the ASP.NET Development Server WEB services provided, stop for a piece, starting IIS construction sites, because the service provided by the ASP.NET Development Server can only be accessed by the machine Do not say a Pocket PC, LAN access other computers as less than the service.
If you have questions, you can email me, I hope I can help a little better: qcrsoft@163.com

(Did not try the case on the simulator)
Reply:
I debugger and simulator on vs2005;
Activesync42 connection with pc and simulator, network simulator set up a unit, the simulator can be accessed Sina normal and so on;

I need to do the procedure on another machine x1 pc send udp packet
Expected: After x1 receive the package, will return some udp data

But encountered trouble:
Now simply can not find on any x1 from the simulator package;
Because I use real machine tested this procedure, completely normal, but the simulator did not work; I think it must be what the environment is not a good job;

Attached some reference data:
My pc machine: 10.164.106.200, emulator running on the machine: Simulator: 192.168.55.100
udp destination address of the machine where x: 10.164.77.100

Reply:
? lz know you encountered such a problem my simulator is: wm5.0 pcc
Reply:
In addition, I can ping pc-x: 10.164.77.100