Reply:
Bangding
Reply:
Khan died! I thought the old master it! ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~! ・ 555555555
Reply:
Need to find the corresponding CPU's own version, the following websites may be available for download.
http://www.chinamac.com
Reprinted attached tutorial, the original site
see above
Description: These methods are applicable to install all MacOSX systems, including MacOSX 10.4 Tiger and MacOSX 10.5 Leopard. The easiest way to install MacOSX is to DVD or CD into the drive, restart the Mac, immediately press the C key, see step by step after the installation interface follow the prompts to install.
However, if the CD-ROM is broken, you can not read the disk or burn, you're not willing to spend money to buy a new CD-ROM, CD-ROM drive of your notebook or bad, can not recognize MacOSX installation disk, how to do? There is no installation from the hard drive or an external FireWire way? The answer is yes, you can even install MacOSX with iPod FireWire, iPod The new USB interface does not work, unless you buy an iPod can be connected to the 1394 (FireWire) connection. (Note: All of the above Apple G4 machines with FireWire, PC users called 1394, Apple used a 6-pin 1394)
The first case: Install
with FireWireYou have two sets or more Macs, the current system to be installed Mac drive does not read the disk, other Mac with a CD-ROM no problem. You can not drive with FireWire.
This situation is relatively simple, the MacOSX installation disk in the CD-ROM disc that good in Apple machines. Find a FireWire, inserted on both Mac FireWire interface connected to two Macs, no problem after restarting the CD-ROM that Apple machine, immediately press the T key until the light icon to release the interface key, which would put Apple machines do not move, stay powered. Back to Mac CD-ROM in question, on the desktop, you can see no problem with the CD-ROM drive that Apple MacOSX installation disk drives and icon, then go to "System Preferences" and select "Startup Disk", then select install MacOSX tray icon, restart the Mac, you can begin installing the MacOSX system.
The second case:
burn Apple with a PC system trayYou only have a Mac, the current system to be installed Mac drive does not read the disk, but there are a PC CD-ROM, PC machine no problem.
We can use a PC to do a MacOSX installation CD ISO disk image, and then restore the disk image to the Apple FireWire hard drive or hard disk, FireWire iPod, use them to start to install. Prerequisite your Mac system can normally enter a MacOSX version.
The MacOSX installation disk into the PC's CD-ROM, PC machine can not see Apple MacOSX installation disk contents inside, it does not matter, use NERO to do an ISO image. Open NERO 7 Express, click the arrow to the left of the interface appears full screen, click "copy audio CD tracks" and then select "ISO image file (*. Iso)" in the "Output Format" drop-down menu on the right path selection Your space larger hard disk partition, and then "go to" Start output. About 10-15 minutes, no output after the end of the prompt, you can go directly to the ISO file.
Click to Enlarge
Copy the ISO file to a Mac, note the file over 2G, mobile hard disk FAT32 format can not be saved, use NTFS formatted hard drives or mobile use network share in the past.
Open in MoacOSX system applications Disk Utility tool, just select a disk or mirrored, on the right click "restore", click on the source behind the object "image" button, select the just created with Nero ISO image file, or ISO image file directly to the source behind the object onto the blank space, select a disk partition disks purpose, which is to be partition can not be installed in the partition, otherwise there may be a conflict, this can also be a mobile hard disk partition apple format If the destination disk partitions as well as useful content, you can not select "Erase Destination." Click "Restore" to start copying, long time, it may take 10-20 minutes.
Click to Enlarge
After the restoration is complete, the Apple menu and select "System Preferences", click "Startup Disk" and find you just revert to the purpose of the disk, the disk there should be MacOSX installation disk, and you can start, select it, click on the "re- Start ", you can begin installing MacOSX it!
The third case: the system with a hard disk installation MACOSX
Downloaded from the Internet MacOSX 10.5, MacOSX 10.4 or any other version of MacOSX DMG mirror or ISO image, or do not want to burn dual-layer DVD burner can not burn discs
We can restore the disk image to the Apple hard drive or FireWire hard drive, FireWire iPod, use them to start to install. Prerequisite your Mac into a normal version of MacOSX system, or start with MacOSX 10.4 installation disk.
MacOSX system opened in Applications -> Utilities -> Disk Utility, just select a disk or mirrored, on the right click "restore", click on the source object behind the "image" button, select download from the Internet DMG or ISO file, or directly to the source of the ISO image file onto the space behind the object, aim to select a disk partition, it is not a partition will be installed the partition, otherwise there may be a conflict, this partition can be Apple's mobile hard disk format, if the destination disk partitions as well as useful content, you can not select "Erase Destination." Click "Restore" to start copying, long time, it may take 10-20 minutes.
After the restoration is complete, the Apple menu and select "System Preferences", click "Startup Disk" and find you just revert to the purpose of the disk, the disk there should be MacOSX installation disk, and you can start, select it, click on the "re- Start ", you can begin installing MacOSX it!
If your Mac is no more than two hard disk or partition, you can use Disk Utility or bootcamp around the area of an 8G After installing and then delete it, but if your hard drive is large enough, it is recommended to look at areas of the hard drive, otherwise After a system crash, can easily lead to data loss.
The fourth case: DMG turn ISO
DMG files downloaded from the Internet, Mac engraved not only engraved with the PC. DMG files need to be converted into ISO files can be engraved on the PC.
Burner does not recognize the PC under the DMG file, even manually changed. ISO file is useless. You can use free software DMG2ISO, convert DMG file to ISO file, you can burn up on the PC. DMG2ISO Apple version and the PC version, choose the corresponding version download conversion.
DMG2ISO Download: http://www.chinamac.com/macsoft/html/10/4311.html
There are other DMG turn ISO tools, we can try. But there should be charged as: IsoBuster, DMG to ISO Converter
Reply:
Passing, see
No comments:
Post a Comment